AAA-055-00138 Rev. 1/14/15
Jaylor Owner Manual - 11 - Mini Mixer Models
• Clear the area of bystanders, especially children, when carrying out any maintenance and
repairs or making any adjustments.
• Do not allow grease or oil to build up on the machine.
• Always use glove and eye protection when handling the battery.
7.8 Hydraulic Safety
• Make sure that all components in the hydraulic system are kept in good condition and are
clean.
• Replace any worn, cut, abraded or flattened hoses or metal lines immediately.
• Do not attempt any makeshift repairs to the hydraulic fittings or hoses. The hydraulic system
operates under extremely high pressure. Such repairs will fail suddenly and create a
hazardous and unsafe condition.
• Wear proper hand and eye protection when searching for a high-pressure hydraulic leak. Use
a piece of wood or cardboard as a backstop instead of hands to isolate and identify a leak.
• If injured by a concentrated high-pressure stream of hydraulic fluid, seek medical attention
immediately. Serious infection or toxic reaction can develop from hydraulic fluid piercing the
• Before applying pressure to the system, make sure all components are tight and that lines,
hoses, and couplings are not damaged.
7.9 Electrical Safety
• Before performing any electrical maintenance or service on the internal combustion engine,
consult the engine manufacturer’s manual and understand and follow all safety practices given.
• Always wear eye protection, gloves and remove all metallic jewelry before performing
maintenance, service or adjustments of the electrical system.
• Always remove the battery cable leads before performing any maintenance, service or
adjustments of the electrical system.
7.10 Tire Safety
• Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an
explosion, which may result in serious injury or death.
• Overloading the tires may result in serious injury or death.
• Have a qualified tire dealer or repair service perform required tire maintenance.
7.11 Storage Safety
• Store unit in an area away from human activity.
• Do not permit children to play on or around the stored machine.
• Store the unit in a dry, level area and block wheels.
• Remove ignition key.
7.12 Safety Signs
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become illegible.
• Safety signs are available from your dealer, distributor, or the factory.
To Next Page
Loading...