Jay-Lor A50 - 28 Lubricating; Auger Support Bushing(S) (All Models); Figure 38 - Auger Support Bushing Grease Locations

AAA-055-00138 Rev. 1/14/15
Jaylor Owner Manual - 52 - Mini Mixer Models
28.0 LUBRICATING
Refer to section ‘27.0 Fluids and Lubricants’ for the recommended grease for use on your
Jaylor. Use section ‘36.0 Maintenance and Service Records’ to keep a record of all scheduled
servicing.
1. Wipe grease fitting clean before greasing, to avoid injecting dirt and grit.
2. Replace and repair broken fittings immediately.
3. If fittings will not take grease, replace immediately.
28.1 Auger Support Bushing(s) (All Models)
Figure 37 - Auger Support Bushing Grease Locations
1. Grease every 10 HOURS.
NOTE – Some mixer components in this figure have been removed for clarity.