Jay-Lor A50 - Steering Chain and Sprocket Assembly (A50 and A100 Self-Propelled Models); Steering Shaft Support Bearings (A50 and A100 Self-Propelled Models); Figure 39 - A50 and A100 Self-Propelled Steering Chain and Sprocket Lubricate Location; Figure 40 - A50 and A100 Self-Propelled Steering Shaft Support Bearings Grease Locations

AAA-055-00138 Rev. 1/14/15
Jaylor Owner Manual - 53 - Mini Mixer Models
28.2 Steering Chain and Sprocket Assembly (A50 and A100 Self-Propelled Models)
Figure 38 - A50 and A100 Self-Propelled Steering Chain and Sprocket Lubricate Location
1. Apply oil or spray lubricant to the ENTIRE steering roller chain every 1 WEEK. DO NOT
over lubricate the chain.
28.3 Steering Shaft Support Bearings (A50 and A100 Self-Propelled Models)
Figure 39 - A50 and A100 Self-Propelled Steering Shaft Support Bearings
Grease Locations
1. Grease every 1 MONTH.