Jay-Lor A50 - Safety Sign Locations (A50 CE Models); Figure 8 - A50 Safety Decal Locations for CE Models

AAA-055-00138 Rev. 1/14/15
Jaylor Owner Manual - 17 - Mini Mixer Models
9.3 Safety Sign Locations (A50 CE Models)
Figure 8 - A50 Safety Decal Locations for CE Models
1. -‘Remove
Ignition Key Before Servicing, Maintaining, or Adjusting the Vertical Mixer’
Decal (see Figure 11)
-‘Wear Ear Protective Gear When Operating the Vertical Mixer’ Decal (see Figure 12)
-
‘Wear Safety Boots When Operating, Servicing, Maintaining, or Adjusting the Vertical
Mixer’ Decal (see Figure 13)
-‘Read Manual Before Operating, Maintaining, or Adjusting the Vertical Mixer’ Decal
(see Figure 15)
-‘Do NOT Drive on Steep Slopes’ Decal (see Figure 16)
2. -‘Rotating Auger Hazard and Rotating Knives’ Decal (see Figure 10)
3. -‘Keep Safe Distance From Machine and Keep Children Out or Range’ Decal
(see Figure 14)
4. -‘Keep Safe Distance From Machine and Keep Children Out or Range’ Decal
(see Figure 14)
5. -‘Rotating Auger Hazard and Rotating Knives’ Decal (see Figure 10)
6. -‘Keep Safe Distance From Hot Surfaces’ Decal (see Figure 17)
NOTE – Although the appearance of the other three A50 models (stationary, trailer, truck
mounted) differ from the A50 self-propelled model, general locations of model applicable
safety decals will stay the same.