JCB EcoMAX Engine Installation Manual
Page 46 of 64 320/A9164-1 © JCB Power Systems Ltd.
15. Installation Approval Limits
In addition to the guidelines covered in this manual, you must do satisfactory testing to make
sure that the limits for the following fluid temperatures and pressures are not exceeded
during all operation duties of the equipment.
15.1 Engine Installation and Operation Limits
Maximum coolant temperature
Maximum oil temperature
SCR System Limit
Inlet temperature
Charge air cooler out temperature
Charge air cooler restriction
Exhaust back pressure
Fuel intake restriction
Fuel intake temperature
Fuel return backpressure
Battery voltage when cranking
ECU temperature
Alternator temperature
The limits listed are shown in the appropriate JCB EcoMAX Technical Data Sheet.
15.2 Exhaust After treatment Installation and Operation Limits
Stub pipe length and weight
Diesel exhaust fluid (DEF) bulk temperature
Vibration (as yet undefined)
The limits listed are shown in the appropriate JCB EcoMAX Technical Data Sheet.
To Next Page
Loading...
