128 – Programming Guide
Miscellaneous Functions
These functions can be used to enhance your custom application.
Function Name Description
getChannelList Gets the channel list for the SWS hardware connected
getOWBInfo Gets the information for each of the modules in the channel list
writeLED Writes a character string to the LEDs of a given channel
blinkLED Controls the blinking of the LEDs for a given channel
setUnits Sets the working units for the X-axis to either nm or GHz
getUnits Gets the current units for the X-axis
Finishing Your SWS Session
Use this function call to close down your SWS program when you have finished using it.
Function Name Description
terminateSWS Terminates SWS processing, cleans up memory, and closes files.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...