14 – General Information and Specifications
Optional Components and Accessories
Optional components and accessories are listed in Table 4.
Table 4: Optional Accessories
Part Number Description
SWS15100+C2 Standard C-band SWS system, with two outputs
SWS15100+C4 Standard C-band SWS system, with four outputs
SWS16100+C1 Standard L-band SWS system, with one output
SWS16100+C2 Standard L-band SWS system, with two outputs
SWS16100+C4 Standard L-band SWS system, with four outputs
SWS15101 Tunable laser source for C-band SWS
SWS16101 Tunable laser source for L-band SWS
OWB10002 Chassis for the receiver (common to C- and L-band systems)
SWS15106 Receiver control module (for either C- or L-band operation)
SWS15103 Dual band selector switch module (C- to L-band switching)
SWS15107 Dual detector module, with two additional detector channels for receiver
(for either C- or L-band system)
ED006412-A-00 One-output module for the source optics module
ED006412-A-01 Two-output module for the source optics module
ED006412-A-02 Four-output module for the source optics module
SWS15110 Receiver (two-channel receiver with software; used either for C- or L-
band operation) includes:
• Chassis (OWB10002)
• Receiver control module (SWS15106)
• Dual detector module (SWS15107)
• Interconnection cable
• Fiber jumper (J-FAFP-B-001-J1)
A0103979 Data acquisition board
SWS15115 Compact two-channel receiver
SWS15104 Four-state polarization controller (for either C- or L-band operation)
SWS15113 Calibration kit, includes an acetylene cell and an HA9 Series Extended
Range Programmable Optical Attenuator
SWS16117 L-band calibration kit, includes a gas cell and an HA9 Series Extended
Range Programmable Optical Attenuator
SWS15116 Parallel port converter
(table continued)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...