Programming Guide – 159
DLL Error Returns
Table 19 lists the error messages that can be returned by the functions.
Table 19: DLL Error Messages
Code Description
0 SUCCESS
-1 INDEX_UNDER_ZERO
-2 INDEX_OVER_TRACESIZE
-3 MEM_ALLOC_FAILED
-4 M0L_CALCUL_ERROR
-5 NO_COLLECTED_DATA
-6 POW_CAL_ERROR
-7 WAVE_CAL_ERROR
-8 SET_PCAL_ERROR
-9 GET_PCAL_ERROR
-10 SET_M0L_ERROR
-11 GET_M0L_ERROR
-12 NOT_ENOUGH_POINTS
-13 CHANNEL_NO_DATA
-14 PEAK_NOT_FOUND
-15 INTERPOLATION_ERROR
-16 INVALID_DATA_VALUE
-17 INVALID_ZERO_LOSS
-18 REQUEST_SCAN_ERROR
-19 REQUEST_AVERAGE_ERROR
-20 REQUEST_OWBINFO_ERROR
-21 RESET_COUNTER_TIMEOUT
-22 TRIGGER_TRACE_TIMEOUT
-23 WRITE_CACHE_ERROR
-24 READ_CACHE_ERROR
-25 DATA_PROCESS_ERROR
-26 INVALID_ZEROLOSS_DATA
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...