162 – Programming Guide
Programming Flowcharts
To develop applications using the DLLs, refer to the VB and C code examples. The examples
show how to call the low level routines that access the hardware. The following flowcharts
(Figure 96 to Figure 104) show the steps required to acquire and process data in insertion loss
and PDL modes.
The flowcharts are:
• Figure 96: SWS Data Collection and Processing
• Figure 97: Insertion Loss Mode Processing
• Figure 98: Zero Loss Data in Insertion Loss Mode
• Figure 99: Acquire Trace
• Figure 100: Get Insertion Loss
• Figure 101: Process Insertion Loss Trace
• Figure 102: PDL Mode Processing
• Figure 103: Zero Loss Data in PDL Mode
• Figure 104: Additional PDL Processing
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...