148 – Programming Guide
Output double *pCenLam:
pCenLam stores the center wavelength of the peak.
double *pCenPow:
pCenPow stores the center power of the peak corresponding to the center
wavelength within the specified wavelength.
Return Value When there is no error, the function returns zero.
When there is an error, the return value contains the error number.
setBand
Description The setBand function sets the band for the next trace. The call to this function
switches the dual band selector module to collect data from the appropriate
transmitter.
C prototype Int setBand( unsigned short uhBand);
VB
prototype
Declare Function setBand Lib "SWS15100"
(ByVal uhBand%) AS BOOLEAN
Inputs Unsigned short uhBand:
let uhBand = 1 for Band C and 2 for L Band, are valid inputs for the wavelength
band.
Outputs Return value:
When there is no error, the function returns zero.
When there is an error, the function returns an error number.
getPassBand
Description The getPassBand function computes the passband of the largest peak
contained in the pPowData power array. Call the function after obtaining
pPowData array through a call to the getILTrace function. The refpeak
parameter must be specified by the caller.
C prototype
int getPassBand( double *pdLamData, double *pdPowData, unsigned short
dataSize, unsigned short refPeak, unsigned short baseRef, double interLevel,
unsigned short refWave, double *pdPassBand);
VB
prototype
Declare Function getPassBand Lib "SWS15100" (ByRef pLamData As Double,
ByRef pPowData As Double, ByVal dataSize%, ByVal refPeak%, ByVal
baseRef%, ByVal interLevel as Double, ByVal refWave%, ByRef pdPassBand
As Double) As Long
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...