General Information and Specifications – 15
Part Number Description
SWS16118 L-band gas cell (for wavelength calibration)
OWB10001 Transmitter cabinet for the transmitter components
SD000327 SWS15104 Four-State Polarization Controller User’s Manual
AC100 Detector cap
AC101 FC detector adapter
AC102 ST detector adapter
AC103 SC detector adapter
AC115 E2000 detector adapter
AC118 LC detector adapter
AC120 Magnetic detector adapter
AC121 Bare fiber holder; requires AC120
J-FAFP-B-001 FC/APC to FC/PC jumper cable (1 m)
J-FASP-B-001 FC/APC to ST/PC jumper cable (1 m)
J-FASC-B-001 FC/APC to SC/PC jumper cable (1 m)
J-FASU-B-001 FC/APC to SC/APC jumper cable (1 m)
Specifications
The optical specifications describe the warranted characteristics of a unit. Supplementary
specifications describe the typical non-warranted performance of a unit.
SWS15100 System
Table 5 outlines the optical specifications for the SWS15100 system.
Table 5: SWS Optical Specifications
Parameter Specification
Fiber type Siecor
1
SMF-28
2
Connector type Universal
Transmitter (SWS15102 source optics module)
ferrule style
PC
Receiver (SW15110) ferrule style APC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...