JDS Uniphase SWS15100 - Testing Source Optics Module Power Levels

206 – Reference
Testing Source Optics Module Power Levels
The flowchart in Figure 111 shows the steps to follow when troubleshooting for source optics
module power.
IS NOISE <
0.025 dB
Yes
No
OBSERVE
TRACE FOR
ABOUT 10
SCANS
END
CLEAN ALL
CONNECTORS
DO POWER TEST
Figure 111: Testing for SOM Power
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com