Operating and Maintenance Instructions – 61
Figure 45: Setting SOM Parameters
A new menu appears, as shown in Figure 46. The arrows are used to select the value of the
parameter. The UP and DOWN buttons are used to increase or decrease the digits of the value.
Using the buttons, the value of the selected parameter can be changed within the limits set for
the laser. When the correct value is displayed, press the BACK button to return to the previous
menu.
Figure 46: Changing Parameter Values
In each menu where values can be changed, the NEXT button is used to select the parameter to
modify. Repeatedly pressing the NEXT button moves a large arrowhead through all parameters.
To increase the value, press the UP button, and to decrease the value, press the DOWN button.
Manual Menu
The manual mode, shown in Figure 47, can be used to check the wavelength and power outputs
of the laser. When the correct value is selected, press the SET button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...