Safety – 7
• Do not operate the unit when its covers or panels have been removed.
Do not interrupt the protective earth grounding. Any such action can lead to a
potential shock hazard that can result in serious personal injury.
Do not operate the unit if an interruption to the protective grounding is
suspected. In this case, ensure that the unit remains inoperative.
Use only the type of fuse specified by the manufacturer as appropriate for
this unit. Do not use repaired fuses, and avoid any situations that can short-
circuit the fuse.
• Use only the type of power cord supplied with the unit.
• Repairs are to be carried out only by a qualified JDS Uniphase professional.
Disconnect the power cord from the unit before adding or removing any
components to or from the installed system.
Operating the unit in the presence of flammable gases or fumes is extremely
hazardous.
Do not perform any operating or maintenance procedure that is not
described in the user’s manual.
Some of the unit’s capacitors can be charged even when the unit is not
connected to the power source.
Safety Symbols
The following symbols and messages can be marked on each unit (Table 2). Observe all safety
instructions that are associated with a symbol.
Table 2: Safety Symbols
Symbol Description
Laser safety. See the user’s manual for instructions on handling and operating
the unit safely.
See the user’s manual for instructions on handling and operating the unit safely.
Electrostatic discharge (ESD). See the user’s manual for instructions on
handling and operating the unit safely.
Frame or chassis terminal for electrical grounding within the unit.
(table continued)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...