18 – General Information and Specifications
Physical
Weight 7.7 kg
Dimensions (W x H x D) 48.3 x 13.3 x 37.5 cm
(48.3 cm or 19 in subrack, 3 U high, in accordance with EIA-310-D;
allow 10 cm front clearance and 8 cm rear clearance for cables)
Number of outputs 1, 2, or 4 (option is specified)
Environmental
Operating temperature 10 to 40 °C
Storage temperature -40 to 70 °C
Humidity Maximum 80% RH at 40 °C (operating)
Maximum 90% RH at 65 °C (non-operating)
Table 7 lists the optical specifications for the tunable laser source.
Table 7: Tunable Laser Source—Optical Specifications
Parameter Specification
Mode hop-free range (P = 3 dBm) in C-band 1520 to 1570 nm
Mode hop-free range (P = 3 dBm) in L-band 1540 to1630 nm
Absolute wavelength accuracy ±0.2 nm
Tuning accuracy (on the mode hop-free range) ±0.02 nm
Tuning repeatability (on the mode hop-free range) ±0.005 nm
Wavelength setting resolution 0.001 nm
Optical frequency fine tuning range ±2 GHz
Power stability ±0.01 dB, peak-to-peak in 1 hour
Wavelength stability (at constant temperature) 0.001 nm
Typical linewidth (FWHM) (on the mode hop-free range) 100 kHz
Linewidth with coherence control >100 MHz
Side frequency suppression ratio
1
>35 dB
Optical connector FC/APC
Remote control RS232 and IEEE
2
488.1
1
Measured with a 100 MHz resolution Fabry-Perot interferometer.
2
IEEE is a registered trademark of the Institute of Electrical and Electronics Engineers, Inc.
Table 8 outlines other specifications for the tunable laser source.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...