Getting Started – 49
a) C-Band b) L-Band
Figure 26. Testing the data collection procedure in C (a) and L (b) bands.
Then click Start Acquiring button to launch the test. Once the Nominal Size Detected
matches the Default Nominal Size, the test is successfully completed.
Figure 27. Nominal Size Detection.
Click the Close button to finish this section of the Wizard. If the test fails please check:
• If the SOM is sweeping in the EXECUTE mode;
• A cable connecting the SOM to the Control Module;
• If the right band is chosen.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...