70 – Operating and Maintenance Instructions
Figure 58: OWB Info Option
Setup—refers to the setup of data transfer hardware, the switch configuration, and parameters
in the SWS15100.INI file. The Setup option displays a dialog box with three option tabs: General
Setup, Switch Setup, and System Setup.
General Setup
General Setup allows the user to enable or disable the wavelength diagnostics for each available
band and to set parameters to fine tune the diagnostics. The user can also change the number
of points in a trace for each band. The General Setup option is shown in Figure 59.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...