CAUTION!
Do not attempt to raise the vehicle by jacking on loca-
tions other than those indicated in the Jacking
Instructions for this vehicle.
3. When changing a front tire, place the scissor jack
under the front chassis lifting point, as indicated by
the triangular lift point symbol shown in the follow-
ing image. Do not raise the vehicle until you are
sure the jack is fully engaged.
4. When changing a rear tire, place the scissor jack
under the rear chassis lifting point, as indicated by
the triangular lift point symbol shown in the follow-
ing image. Do not raise the vehicle until you are
sure the jack is fully engaged.
5. Raise the vehicle by using the wheel lug wrench and
jack handle to turn the jack screw clockwise. Raise
the vehicle only until the tire just clears the surface
and enough clearance is obtained to install the
spare tire. Minimum tire lift provides maximum
stability.
Jacking Locations Front Lifting Point
Front Jacking Location
Rear Lifting Point
Rear Jacking Location
IN CASE OF EMERGENCY 261
7
To Next Page
Loading...
