~
VM9313
Bluetooth Sub-menu Features
Setting
Options Function
Bluetooth
Off Disable Bluetooth function.
On Enable Bluetooth function.
Connect Manual Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
Auto Automatically connect when your
paired phone is in range.
Auto Answer Manual Manually answer calls by touching
the "call" button.
Auto The unit automatically answers all
incoming calls.
Pairing Code
The default code is "1234". Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Not all
phones/devices require a pairing
code. The default code is "0000" for
many models.
Rating Sub-menu Features
The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is unlocked. Once
setup, the parental lock is released only by entering the
correct password. Once the password is entered, rating is
available for setup.
Setting Options
Function
Password
----
Enter a 4-digit password to
activate the "Rating" feature.
Rating
1.
Kid Safe Select the appropriate rating
2.
G
level for the intended audience.
3.PG
You
may override higher rat-
4. PG-13
ings by
usinQ
your password.
5.
PG-R
6.R
7.
NC-17
8.
Adult
Load Fac- Reset Select "Reset" to restore the
tory
factory default settings for the
Rating system
only.
To
reset the password, access the "RATING" menu and enter
the current password. Once the correct password is entered,
you can access the "Password" field and enter a new one.
NOTE: Record the
password
and
keep
it
in a safe place
for
future reference. The rating
for
each disc is marked
on
the disc,
disc
packing,
or
documentation.
"the
rating
is
not
available on the disc, the parental
lock
feature
is
unavailable. Some discs restrict
only
portions
of
the disc
and
the appropriate
content
will
play.
For
details, please
refer to the
disc
description.
Hardware Sub-menu Features
If
the rear-view video camera
is
connected, the unit is on, and
the TFT monitor is retracted inside the unit, the TFT monitor
automatically moves into the viewing position and Camera
mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back
inside unit.
Setting
Options
Function
Camera
In
Normal
Mirror Reverse the camera image as
if
looking through a rear-view
mirror.
TFT Auto On The TFT panel automatically
Open
opens when the unit is turned
on.
Off
You
must press the OPEN but-
ton (1) to open the TFT panel.
Manual When the ignition is turned
OFF, the TFT panel DOES
NOT retract
if
it was previously
out
Video Input
NTSC The color signals are output in
(Input cir-
the standard
~TSC
format.
cuitry auto-
PAL
The color signals are output in
detects the
video sig-
the standard PAL format.
nal from the
Auto The color signal output is
Aux
In
switched automatically based
source).
on the current video input sig-
nal - NTSC
or
PAL.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.
11
P.
VOL
Sub-menu Features
Setting
Options
Function
Source
Radio Choose a source for which you
Disc
would like to increase the rela-
tive volume (LEVEL).
USB
AUXIN1
AUXIN2
SAT
iPod
NAVI
Level 0-6 Increase relative volume for
specified source up to 6 decib-
bels.
To Next Page
Loading...
