VM9313
~
TS Cal (Screen Calibration)
To
access the "Screen Calibration" function from the SETUP
menu, select the "TS CAL" option.
After entering calibration mode, a crosshair +appears in a
corner quadrant
of
the screen.
To
begin calibration, press
and hold the crosshair for one second until it moves to the
next quadrant. Continue for each quadrant until the
calibration is completed.
Demo Sub-Menu Features
You
can stop/run demonstration mode or turn Demo Auto
Run on/off by choosing the "Demo" option from the SETUP
MENU.
When "Demo Auto Run" is Off, you can select "Demo
Mode>
Run" to start Demo Mode. Demo Mode scrolls through the
various source screens, simulating activity on the display.
"Demo Mode" is discreetly displayed
in
yellow text (below the
clock), to indicate the unit is
in
Demo Mode.
To
stop Demo
Mode, press the upper-left quadrant
of
the TFT (Source
select).
When "Demo Auto Run" is On, the unit will automatically
display Demo Mode when powered on.
Exiting
the
System
Setup
Menu
To
exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
12
To Next Page
Loading...
