Limits Menu, continued
Value Explanation
FailSafe delay
Delay before the failsafe function is activated.
Range = 0.1 to 20.0 seconds.
FailSafeTimeOut
Delay before turbine shuts off because of a failsafe.
Range = 0.1 to 20.0 seconds
FailSafeRPM
RPM the turbine will throttle to during a failsafe time out period.
Range = Minimum RPM to Maximum RPM
Drain GasTank
If enabled, after turbine is started and throttled up, the starting gas
valve will open, draining the tank.
Default – Disabled (Off)
Limits Menu, continued
StartUp Mode
This function allows for different engine start procedures for multi
engine models. The possible methods are: Sequence
• Start the engine by moving the throttle trim to maximum
and then moving the throttle stick to maximum.
50
To Next Page
Loading...
