SOME OTHER NUMBER. THIS IS THE HEAD SPEED AND TAIL ROTOR SPEED IN THE COMPUTER AT THE
MOMENT
. TO CHANGE THE HEAD SPEED TO THE DESIRED VALUE, PRESS AND HOLD THE CHANGE VALUE
AND PRESS THE
+ OR – KEYS. THIS WILL CHANGE THE SHAFTHIR1 VALUE WHICH WILL IN TURN ALTER
THE
ROT VALUE. SET THE SHAFTHIR1 VALUE SO THAT THE ROT VALUE EQUALS THE HEAD SPEED
YOU WANT
. IF YOU ONLY WANT A SINGLE HEAD SPEED SETUP THEN THE AUX CONNECTION IS NOT
USED
........................................................................................................................................................51
TROUBLESHOOTING ...........................................................................................................................53
REASON FOR SHUT-DOWN ......................................................................................................................54
MAINTENANCE......................................................................................................................................56
RESET THE ECU TO THE FACTORY DEFAULT VALUES. ...........................................................................57
PARTS LIST .............................................................................................................................................59
OPTIONAL ACCESSORIES.........................................................................................................................59
7
To Next Page
Loading...
Need help?
General
