AD-1272 Advanced Thermal Dispersion Probe Airflow Measuring System Technical Bulletin
38
Enable, Disable, and Change the Supervisor PIN
The Enable Supervisor PIN and Change Supervisor PIN menu options are used to enable or disable the
Supervisor Menu PIN and change the current PIN.
Note: The PIN is not set or enabled on a device with factory-default settings.
Note: If the Enable Supervisor PIN option is selected, the Supervisor Menu can only be accessed with a PIN.
To enable or disable the PIN:
1. Enter the Enable Supervisor PIN submenu.
2. Press UP or DOWN to choose Yes to enable the PIN or No to disable the PIN.
3. Press ENTER to confirm the selection.
To update the PIN:
1. Enter the Change Supervisor PIN submenu.
2. Press UP or DOWN to scroll to display the numbers 0 through 9.
3. When the correct number is displayed, press ENTER to select the digit. The cursor automatically moves to the
next position. If an error is made after pressing ENTER, press ESC to return to the previous digit.
4. Enter the last digit and press ENTER to store the PIN number. The display returns to the Supervisor Menu
submenu display. Alternatively, press ESC to return to the Supervisor Menu without updating the PIN.
Note: If the PIN settings are enabled, the PIN number must be entered each time the Supervisor Menu is
entered.
Factory Default
(Factory Default)
Restores the device to the factory-default settings. Any previous settings made in the
Operator and Supervisor Menus are reset including dimensions, the Operator PIN, and
custom text.
Exit Supervisor Menu
(Exit Supv Menu)
Returns the display to normal operation.
Table 17: Supervisor Menu Submenus (Part 2 of 2)
Supervisor Menu
Submenus (Actual
Display Name)
Description
Figure 65: Supervisor PIN Flowchart
Normal Display
Enable Supervisor
PIN
Change Supervisor
PIN
MENU
ENTER
ESC or ENTER
ENTER
ESC or ENTER
DOWN
UP
Submenu Selection Display
To Next Page
Loading...
Need help?
General