Johnson Controls FX-DIS1710-0 - Setting the Backlight Intensity; Setting the Backlight Timeout

FX-DIS Local Controller Display Technical Bulletin 23
Setting the Backlight Intensity
To set the backlight intensity:
1. Go to the Main Menu.
2. Scroll down to select the Display Information option and press Enter.
3. Scroll down to select the Backlight Intensity parameter and press Enter. The
Modify page appears.
4. On the Modify page, use the up/down arrow keys to select a backlight intensity
(Figure 28). The screen changes as you select an intensity level.
5. Press Enter to select Accept.
6. Press Enter again to save the setting and return to the Information page.
7. Press Esc to return to the Main Menu.
Setting the Backlight Timeout
To set the backlight timeout:
1. Go to the Main Menu.
2. Scroll down to select the Display Information option and press Enter.
3. Scroll down to select the Backlight Timeout parameter and press Enter. The
Modify page appears.
4. On the Modify page, use the up/down arrow keys to select a backlight timeout
(Figure 29).
5. Press Enter to select Accept.
6. Press Enter again to save the setting and return to the Information page.
7. Press Esc to return to the Main Menu.
Figure 28: Modify Backlight Intensity Page
Modify
Accept
Cancel
Backlight Intensity
Selections
FIG:Baklitintscrn
Medium
Bright
Current Setting
Figure 29: Modify Backlight Timeout Page
Modify
Accept
Cancel
Backlight Timeout
Selections
5 Min.
1 Min.
Current Setting