Operation of the Control Panel Fire Alarm Event
24 IFC-3030 Operations Manual — PN 52026:C 08/05/2005
1. Check the Alarm message for its location and type. Press the MORE INFORMATION soft key
to display the MORE INFORMATION screen and view additional information on the device and
possibly preprogrammed text for recommended action. ( Refer to Figure 1.7 on page 17 for an
example of the this screen and an explanation of its fields.)
2. Correct the condition causing the alarm.
3. When the alarm condition is corrected, press the SYSTEM RESET soft key to return the control
panel to normal operation (indicated by the “System Normal” message). The control panel
sends a “System Normal” message to the panel display, History buffer and installed printer.
The soft key PROGRAM/ALTER STATUS is also displayed on this screen. A password is required
to enter these menus, which are described in the IFC-3030 Programming manual.
2.2.3 Interpreting Type ID Codes
The Type ID code that displays in the fire alarm message is related to the type and function of the
point that initiates the fire alarm. For example, a monitor module with a
PULL STATION Type ID
code means that the monitor module connects to a manual pull station. If the Type ID code is
unfamiliar, refer to "Software Type ID Codes" on page 63. This appendix is an alphabetical list of
Type ID codes with an explanation of each.
To Next Page
Loading...
Need help?
General
