Johnson Controls MS-FIT100-0 - Single Point of Contact Information

1/7/2021 PDF Export
https://docs.johnsoncontrols.com/bas/internal/api/webapp/print/b4118696-0b8a-4733-98fb-fdd04b065b15 59/60
11. Turn the Power Switch to the OFF position.
12. Remove the USB 2.0 A Male to Micro USB 5 pin Male Cable from the FIT.
13. Replace the back cover and return the FIT to the rubber protective boot.
Single point of contact
APAC Europe NA/SA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT
MANAGEMENT
NO. 32 CHANGJIJANG RD NEW
DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA
JOHNSON
CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON
CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI
53202
USA