Johnson J2R4SUC 2007 - Page 115

113
MIDSECTION
REMOVAL
7
Remove the washer, two tiller handle bushings,
tiller handle mount, and tiller handle spacer from
the tiller handle.
Remove the throttle adjust knob.
Remove the throttle cable screw and the cable
stopper. Remove the two throttle cable screws.
Take out the throttle lower case and the throttle
upper case from the tiller handle.
Remove throttle cable end from the tiller handle.
Remove the throttle grip from the tiller handle.
1. Washer
2. Bushing (2)
3. Mount
4. Spacer
006191
1. Throttle adjust knob 006192
1. Screw
2. Stopper
3. Throttle cable screw (2)
006193
1
2
3
4
2
1
1
2
3
1. Lower case
2. Upper case
006194
006195
1. Throttle grip 006196
2
1
1