EasyManua.ls Logo

Johnson J2R4SUC 2007 - Standard Torque Specifications

Johnson J2R4SUC 2007
179 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
SERVICE SPECIFICATIONS AND SPECIAL TOOLS
TECHNICAL DATA
TECHNICAL DATA
ENGINE
HP 2.5
Full Throttle
Operating Range RPM
5250-5750
Power 2.5 HP (1.8 kw) @ 5500 RPM
Idle RPM in Gear 1800 to 2000
Weight 30.1 lbs. (14 kg)
Lubrication
Evinrude/Johnson Ultra 4-Stroke outboard oil
Refer to Oil Requirements on p. 32.
Engine Type 4-Stroke OHV 1-cylinder
Displacement
4.2 cu. in. (68 cm
3
)
Bore 1.89 in. (48 mm)
Stroke 1.50 in. (38 mm)
Compression ratio 9.0:1
FUEL SYSTEM
Carburetion One single-throat carburetor, float feed
Main Jet #70
Pilot Jet #32
Starting Enrichment Manual
Float Level Setting 10 ± 2 mm
Preferred Fuel Regular unleaded, plus grade unleaded, premium unleaded gasolines
Acceptable Fuel Any of the above gasolines with 10% Ethanol or 5% Methanol with 5% co-solvents
Minimum Octane 87 AKI (R+M)/2 or 90 RON
Additives
2+4
®
Fuel Conditioner, Fuel System Cleaner, Carbon Guard
Use only Evinrude/Johnson recommended fuel additives.
The use of other additives may result in engine damage.
See Fuel Requirements on p. 31 for additional information.

Table of Contents