141
MANUAL STARTER
REMOVAL
9
REMOVAL
Remove the motor cover.
Tie a knot in the rope inside of the motor cover to
prevent the rope from rewinding onto the recoil
reel when the starter grip is removed.
Remove the knot from grip holder. Remove the
grip holder and starter grip. Completely remove
the motor cover.
Install the starter grip and the grip holder to the
end of the rope. Loosen the knot previously tied in
the rope.
Remove the three bolts and the recoil starter
assembly.
WARNING
Avoid accidental starting of engine while
servicing, twist and remove all spark plug
leads.
Wear safety glasses while disassembling
and assembling manual starters to avoid
personal injury caused by rewind spring
tension.
006280
006281
1. Grip holder
2. Starter grip
006282
006283
1. Bolt (3) 006284
1
To Next Page
Loading...