144
MANUAL STARTER
ASSEMBLY AND INSTALLATION
Install the reel and the recoil spring to the recoil
case aligning the inner end of the spring with the
boss cutaway on the case.
Install the ratchet and the spring.
Install the friction plate. Apply Screw Lock to
threads of screw then tighten the screw.
IMPORTANT: Screw is a left-hand thread.
Rotate the reel approximately four turns counter-
clockwise until the recoil spring is tensioned.
1. Reel 006294
1. Ratchet
2. Spring
006295
1
1
2
1. Friction plate
2. Screw
006286
006297
1
2
To Next Page