148
WIRE/HOSE ROUTING
FUEL HOSE ROUTING
FUEL HOSE ROUTING
• Do not over-bend (kink) or twist hoses when installing.
• When installing hose clips, position tabs to avoid contact with other parts.
• Check that hoses do not contact rods and levers during either engine operation or standstill.
• Extreme care should be taken not to cut, abrade or cause any other damage on hoses.
• Care should be taken not to cause hoses to be compressed excessively by any clamp when fitted.
Fuel tank
Fuel cock
Fuel hose
Breather hose
006300
To Next Page