JRC JHS-182 - Page 50

5-29
c) TEXT EDIT SCREEN
Select [EDIT] on the bottom of the screen and display TEXT EDIT SCREEN for transmitting a
text message.
Enter texts, according to the procedure of “5.1.1 KEYBOARD DISPLAY AND INPUT METHOD”.


TEXT EDIT SCREEN consists of three sub screens：
① Text Screen
② Keyboard Screen（See 5.1.1）
③ Send and Save Screen (See “d)”）




1. Rotate the Jog Dial, then the cursor in Keyboard Display Screen (②) moves accordingly.
2. Select a character in ② with the cursor and press the Jog Dial, then the selected character
appears on ①.
3. While entering characters with the keyboard, if CLR is pressed, one character under the
cursor disappears.
4. Select 『→』 in ② and press the Jog Dial, then the cursor jumps to ③.
5. While the cursor is on ③, if CLR is pressed or [EXIT] is selected and pressed、the cursor
returns to ②.
6. Selecting [SAVE] saves the message, and returns the display to Message Menu.
7. Selecting [TX] sends and saves the message, and returns the display to Message Menu.
8. Selecting [ALL CLR] clears all the data in ① and moves the cursor to ②.
Maximum Number of characters to send a message
FORMAT CATEGORY CHARACTERS
ADDRESSED SAFETY 156
ROUTINE 151
BROADCAST SAFETY 161
ROUTINE 161
EDITANDTXUTC11:44
BRG:RNG NAME/MMSI
270°:0.18NM
35°:0.29NM
*22°:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
HOWAREYOU?
IT’SFINE.
V


ABCDEFGHIJKLMNOP
QRSTUVWXYZ.0123
456789[]“#$%&’
()?@+-*/^,:;<=>!
[EXIT]
[SAVE]
[TX]
[ALLCLR]

Text Edit Screen
1
3
2