JRC JHS-182 - Page 66

5-45
a) CONFIRMATION OF SETTINGS
When you completed step 7 above, the cursor moves down to [EXIT] at the bottom of the screen.
Bring the cursor on [CHECK] with the Jog Dial and press it. Then the result of diagnosis is
displayed at the bottom of the screen.
If the message does not show an error, you can register it by selecting and confirming [SAVE].





















REGIONALCHANNELSETTINGUTC11:44
BEARING:RANGE NAME/MMSI
270°:0.18NM
35°:0.29NM
*22°:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
1.CHA:1222NARROWTX/RX
2.CHB:2222NARROWTX/RX
3.TX/RXMODE:TX/RX,TX/RX

[EXIT][CHECK][SAVE]
[LIST][ALLCLEAR]
NG 20NM<AREA<200NM
Information Notes
20NM<AREA<200NM
AREA CORNER ERR
AREA 500NM OVER
CH BW ERR
OTHER ERR
OVERTIME ERR
Display the message for 2 seconds.
Diagnosis Results is being displayed