3.2 OBSERVE AND ADJUST VIDEO.............................................................. 3-5
3.2.1 ADJUST
MONITOR BRILLIANCE [BRILL] ......................................... 3-5
3.2.2 CHANGE OBSERVATION RANGE [RANGE + / - ] .............................. 3-5
3.2.3 TUNE.................................................................................................... 3-6
3.2.4 ADJUST GAIN [GAIN / PL] .................................................................. 3-7
3.2.5 SUPPRESS SEA CLUTTER [AUTO-SEA]........................................... 3-8
3.2.6 SUPPRESS RAIN / SNOW CLUTTER [AUTO-RAIN] ........................ 3-10
3.2.7 RESET ALARM BUZZER [ALARM ACK] .......................................... 3-11
3.3 OPERATION PROCEDURES ................................................................. 3-12
3.3.1 MOVE CROSS CURSOR MARK BY TRACKBALL ........................... 3-12
3.3.2 OPERATE SOFTWARE BUTTONS ................................................... 3-13
3.3.3 BASIC MENU OPERATION ............................................................... 3-14
3.3.4 OPERATION ON NUMERIC VALUE, LATITUDE / LONGITUDE
AND CHARACTER INPUT MENU.................................................... 3-16
3.3.5 OVERVIEW OF MENU STRUCTURE ................................................ 3-20
3.3.6 OPERATE MULTI-DIAL [MULTI]........................................................ 3-20
3.4 GENERAL RADAR OPERATION............................................................ 3-22
3.4.1 INTERFERENCE REJECTION (IR) ................................................... 3-22
3.4.2 SWITCH TRANSMITTER PULSE LENGTH [GAIN / PL] ................... 3-23
3.4.3 TARGET ENHANCE (ENH)................................................................ 3-24
3.4.4 USE VIDEO PROCESSING (PROC) ................................................... V25
3.4.5 SWITCH AZIMUTH DISPLAY MODE [AZI MODE]............................. 3-26
3.4.6 SWITCH TRUE / RELATIVE MOTION DISPLAY MODE [TM / RM].... 3-27
3.4.7 MOVE OWN SHIP’S DISPLAY POSITION [OFF CENT] .................... 3-28
3.4.8 DISPLAY RADAR TRAILS [TRAILS]................................................. 3-29
3.4.9 ERASE PART OF RADAR TRAILS (TRAILS ERASE) ...................... 3-31
3.4.10 OPERATE RADAR TRAILS FILE (FILE OPERATIONS) ................... 3-32
3.4.11 ZOOM (X2) ......................................................................................... 3-34
3.4.12 HIDE / DISPLAY RANGE RINGS (RR / HL)........................................ 3-34
3.4.13 HIDE GRAPHICS INFORMATION ON RADAR DISPLAY
(DATA OFF) ...................................................................................... 3-35
3.4.14 SWITCH DAY / NIGHT MODE [DAY / NIGHT] .................................... 3-35
3.4.15 ADJUST OPERATION PANEL BRILLIANCE [PANEL] ..................... 3-35
3.4.16 SET TRUE BEARING (GYRO SETTING)........................................... 3-36
3.4.17 SET OWN SHIP SPEED..................................................................... 3-36
3.4.18 MAGNET COMPASS CORRECTION (MAG COMPASS SETTING) .. 3-37
3.4.19 SET DRIFT CORRECTION (SET / DRIFT SETTING)......................... 3-38
3.4.20 GPS RECEIVER SETTING (GPS PROCESS SETTING) ................... 3-39
3.4.21 DGPS RECEIVER SETTING (DGPS SETTING) ................................ 3-43
To Next Page
Loading...
Need help?
General
