3.4.22 SBAS RECEIVER SETTING (SBAS SETTING) ................................ 3-44
3.4.23 DISPLAYING GPS RECEPTION STATUS (GPS STATUS)................ 3-47
3.4.24 SET RADAR ALARM (RADAR ALARM) ........................................... 3-48
3.5 USE OWN SHIP'S TRACK DATA............................................................ 3-50
3.5.1 DISPLAY OWN SHIP’S TRACK (DISPLAY OWN TRACK)................ 3-50
3.5.2 SAVE OWN SHIP'S TRACK DATA (OWN TRACK MEMORY) .......... 3-51
3.5.3 CANCEL SAVING OF OWN SHIP’S TRACK DATA
(OWN TRACK MEMORY)................................................................. 3-51
3.5.4 CLEAR OWN SHIP’S TRACK DATA (CLEAR OWN TRACK) ........... 3-51
3.5.5 OPERATE OWN SHIP'S TRACK FILES (FILE OPERATIONS) ......... 3-52
3.6 DISPLAY USER MAP.............................................................................. 3-55
3.6.1 CREATE USER MAP (MARK / LINE)................................................. 3-55
3.6.2 SET USER MAP DISPLAY (MARK DISPLAY SETTING)................... 3-58
3.6.3 EDIT USER MAP (EDIT USER MAP)................................................. 3-61
3.6.4 EDIT MARK / LINE LIST (MARK / LINE LIST) ................................... 3-67
3.6.5 CORRECT POSITION ON USER MAP (SHIFT USER MAP) ............. 3-73
3.6.6 OPERATE USER MAP FILE (FILE OPERATIONS) ........................... 3-74
3.6.7 SET AND DISPLAY GEODETIC SYSTEM (GEODETIC) ................... 3-78
3.7 USE ROUTE FUNCTION ........................................................................ 3-79
3.7.1 DISPLAY DESTINATION MARK (NMEA WAYPOINT DISPLAY)....... 3-79
3.7.2 RECEIVE ROUTE DATA SETTING (SELECT ROUTE) ..................... 3-80
3.8 APPLIED OPERATIONS......................................................................... 3-81
3.8.1 SET RADAR SIGNAL PROCESSING (PROCESS SETTING)........... 3-81
3.8.2 SET RADAR TRAILS (RADAR TRAILS SETTING)........................... 3-83
3.8.3 SET SCANNER UNIT (TXRX SETTING)............................................ 3-85
3.8.4 SET CURSOR (CURSOR SETTING)................................................. 3-86
3.8.5 SET RADAR DISPLAY (DISPLAY SETTING) .................................... 3-87
3.8.6 ADJUST SOUND VOLUME (BUZZER VOLUME) ............................. 3-89
3.8.7 SET USER KEYS [USER KEY 1 / 2] .................................................. 3-90
3.8.8 SET NAVIGATION DATA DISPLAY (MULTI WINDOW SETTING) ..... 3-92
3.9 USE FUNCTION KEY [FUNC] ................................................................ 3-96
3.9.1 OPERATION PROCEDURES [FUNC] ............................................... 3-96
3.9.2 FUNCTION SETTING MENU ITEMS (USER FUNCTION SETTING). 3-97
3.9.3 OVERVIEW OF FUNCTION OPERATIONS
(USER FUNCTION SETTING).......................................................... 3-98
3.9.4 OVERVIEW OF SAVED FUNCTION SETTING DATA...................... 3-101
3.10 USE USER SETTING ............................................................................ 3-102
3.10.1 SAVE OPERATING STATE (SAVE USER SETTING) ...................... 3-102
3.10.2 LOAD OPERATING STATE (LOAD USER SETTING) ..................... 3-103
3.10.3 DELETE OPERATING STATE (DELETE USER SETTING) ............. 3-103
To Next Page
Loading...
Need help?
General
