JRC JMA-922B-9XA Installation Manual

5-17
Left-click the [Recv Test] button of “Communication” of the [Sensor Set] dialog. [Line Monitor] dialog will
appear.
Select a place of the entry of the sensor data in "Select Port" and left-click the [Start] button. The
receive-data of the set terminal board can be confirmed.
Left-click the [Recv Test] button
Left-click the [Start] button
Select a place of the entry of the sensor data
Confirm a receive data

JRC JMA-922B-9XA Specifications

General

Brand	JRC
Model	JMA-922B-9XA
Category	Marine Radar
Language	English