JRC JMA-922B-9XA Installation Manual

5-20
The save of the sensor setting
The changed setting isn't saved when doesn't left-click the [Set] button. To save changed setting, always
left-click the [Set] button.
After the change of all setting and the save end, left-click the [Close] button and it ends the setting of a
sensor.
(1) Left-click the [Set] button
(2) Left-click the [Close] button

JRC JMA-922B-9XA Specifications

General

Brand	JRC
Model	JMA-922B-9XA
Category	Marine Radar
Language	English