JRC JMA-922B-9XA Installation Manual

5-12
When setting a sensor to Auto Pilot or Ship LAN by procedure 3), select use equipment from the inside of
"Select Interfce Type".
(1) Left-click the [ ] button.
(2) Select the Type of Auto Pilot from the list.
(3) Left-click the [Next] button.
When selecting ”Auto Pilot”
(1) Left-click the [ ] button.
(2) Select the kind of Ship LAN from the list.
(3) Left-click the [Next] button.
When selecting ”Ship LAN”

JRC JMA-922B-9XA Specifications

General

Brand	JRC
Model	JMA-922B-9XA
Category	Marine Radar
Language	English