JRC JMR-9272-S - Setting up the Operation Mode

Section 5 Basic Operation of the Radar 5-2
Power ON this system and start the radar.
Adjust reception gain, sea clutter and rain/snow
clutter so that the observation range as well as the
target display become the clearest.
Acquire data, and then measure the range and
bearing of the target.
Exit the operation of the Radar.
Refer to "5.2.1 Powering on and starting".
Refer to "5.3 Observation Environment and
Image Adjustment".
Refer to "5.4 General Radar Operation".
Refer to "5.2.2 Exiting radar operation".