Section 6 Target Tracking and AIS 6-40
6.5.8.3 [Gate Display]
The gate displays an area monitoring a target using the TT function. This equipment allows the gate
size to change automatically according to target range and size. The gate size can be checked using
the following function.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on the [Settings] - [TT Test] on the menu.
The [TT Test] (Test for Target Tracking) dialog is displayed.
3 Select the [Gate Display] checkbox.
When [Gate Display] is selected, the gate is displayed.
When [Gate Display] is cleared, the gate is not displayed.
4 Set the cursor mode to the AUTO mode.
To Next Page
Loading...
