Section 5 Basic Operation of the Radar 5-38
5.4.14.2 Entering the ship's heading/own ship's speed
manually
If any device such as LOG, etc., connected to this equipment malfunctions, it is possible to manually
enter own ship's heading/speed by the method described below to use the target tracking (TT) and true
motion display functions.
1 Select [Menu] from the corresponding combo box.
The [Sensor Selection/Status] dialog box is displayed.
2 When inputting a ship's heading manually, select [MAN] from the [Heading] combo box.
To input an own ship speed manually, select [MAN] from the [STW] combo box.
3 Click on the input box.
4 Enter a numeric value by using the software keyboard.
To Next Page
Loading...
