6-45 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6.6.4 Displaying AIS information
1 Set the cursor mode to the AUTO mode.
2 Place the cursor on the AIS target to display the activated AIS target information and
then click on.
The information of the selected AIS target is displayed.
Note
When the numeric data of a target is displayed but the mark " " is not on the radar display,
the target is outside the display.
To Next Page
Loading...
