JRC JMR-9272-S - Creating a Route by Using the Assistant Circle Function

9-39 Section 9 Route Planning
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6 After creating the last WPT, double click the left button or click the right button.
The Route planning is terminated.
9.7.2.2 Creating a route by using the assistant circle function
A route can be created by using an assistant circle (supplementary line).
The assistant circle function adds WPT at the position where the mark such as headland and the leg
intersects at right angles.
When the position that is used as the mark is determined and the cursor is moved to the position, WPT
is added at the position where the leg and the position intersect at right angles.
1 Select the [Use Assistant circle] check box of the [Edit] button.
2 Move the cursor to any position and click the left button.
WPT0 is created.
3 Move the cursor to the position as the mark (example, headland) and click the button.
Supplementary line