JRC JMR-9272-S - Using [New Target Warning] Dialog Box in the [Alert] Menu

Section 6 Target Tracking and AIS 6-24
6.5.2.1 Using [New Target Warning] dialog box in the [Alert] menu
1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click [Alert] - [New Target Alarm] on the menu.
The [New Target Alarm] dialog is displayed.
3 To set up AZ1, select the [Use AZ1] check box. To set up AZ2, select the [Use AZ2]
check box.
4 To set up [Use AZ1], click on the [1] tab. To set up [Use AZ2], click on the [2] tab.
Their respective setting items are displayed.
5 Enter the start angle, end angle, start distance and end distance of AZ.
Start angle
End angle
Start distance
End distance