14-65 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
14.5.8.3 Tidal Stream mark
A current drift and a bearing can be input for a tidal stream mark. Edit the current drift (Drift) and the
bearing (Set) after creating a tidal stream mark on the object property dialog box.
1 Click on the [Type] button on the drawing toolbar.
An icon list is opened.
Select the icon of a tidal stream mark. (Refer to "14.2.3 Selecting an object type").
2 Click on the position on which a tidal drift mark is to be created with the cursor.
A tidal stream mark is displayed on the position on which the button was clicked and the
parameters of the tidal channel mark that was created are displayed on the object property
dialog box.
Latitude and longitude of the starting point
Select Actual/Predicted.
Specify a bearing.
Specify a current drift.
Specify date/time.
ctual Predicted
To Next Page
Loading...
