Settings & Registrations
5-21
4
4
4
.
.
.
After inputting, press Enter key to close the screen and finish the registration.
There is the station database menu (Service Station database) as a similar
registration menu to register the station information. The station database
operation is basically the same with the station list. However note that the station
list is designed for the manual input only, but the station database is designed to
register the station information more easily such as copying the original station
database prepared in advance. The functions available on the station database
screen are as follows.
・ Program ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Registers the station information located with the
cursor to the desired line of the station list.
・ Read ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Reads the station database saved in the flash ROM or
the USB memory.
・ Write ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Saves the prepared station database in another drive or
the folder.
・ Get ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Loads station information of the station list on a line of
the station database.
Note
To Next Page
Loading...
