JRC JSS-2150 - Maintenance Information Indication

Maintenance & Inspection
6-12
6.4 Maintenance information
When this equipment detects internal or external error, it displays them as maintenance
information.
6.4.1 Maintenance information indication
■Procedure ■
1
1
1
.
.
.
While the equipment error is occurring, the
MI (Maintenance Information) mark is
displayed at the top of the screen as shown
on the right.
2
2
2
.
.
.
With the MI mark displayed, press MENU and
8 together to display the Maintenance
information.
 The Maintenance information can also be
displayed by pressing MENU and selecting
6.2 BAM alert list in the menu list.
 Pressing the CANCEL key in the
Maintenance information moves the display
up one level in hierarchy.
 Press ENT at the right figure to display the
Maintenance information history. (Refer to
6.4.3 for the Maintenance information
history.)
 When the BAM function is OFF, a
pop-up will be displayed as shown on
the right.
 Press CANCEL to return to the screen
before displaying the pop-up
 When the TRX 024.PLL unlock or WKR
MODEM 030.PLL unlock error is
occurring, that mark remains as shown
below until the equipment is restored to
normal conditions.
TEL ITU- 401
4357.00
4065.00
RX kHz
TX kHz
D UP
WKR scan bands:
ID 431001234 23:59(UTC)
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
SIG
NonDST: +
DROBOS: +
EdtDST: +
M ENU
M ENU
1
2
3
M ENU
Unlock
Unlock
G PS
TEL ITU- 401
4357.00
4065.00
RX kHz
TX kHz
D UP
WKR scan bands:
2 4 6 8 12 16MHz
ID 431001234 23:59(UTC)
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
SIG
12 -S N2
NonDST: +
DROBOS: +
EdtDST: +
M ENU
1
2
M ENU
G PS
MENU
3
MI mark
ID 431001234 23:59(UTC)
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59 (EXT)
TEL Rx:13077.00/Tx:12230.00kHz
6.2)Maintenance information
ATU :017,ATU lost
TRX :020,DISP KEY
Press ENT for Maninte history
MENU＋ 8
Note
Maintenance information
ATU ：017,ATU lost
TRX ：020,DISP KEY