xvii
Receiving a Distress Alert
WARNING
If a distress alert is received, make sure to inform the ship's captain or officer in charge.
Doing so may save the lives of the crews and passengers on the ship in distress.
1
1
1
.
.
.
When a distress alert is received, the BAM alert is displayed. ENT button is pressed to
close the BAM alert display and information such as the ID number of the ship in distress
and the stage of the distress event are displayed.
If the equipment is not used, i.e. there is no active procedure at that time, a distress and safety frequency is
set and the ALM lamp starts blinking, and an alert sound gradually grows louder.
2
2
2
.
.
.
Press the CANCEL key to stop the alert. If the popup screen is shown, select "Accept" and
press ENT.
After the specified communicate mode and the distress frequency are set, keep watch under such a condition.
Keep watch for five minutes or more, and executes the report to the coast station etc. as appropriate
Even if there is no active procedure as above, when
the menu “7.5.9 Auto FREQ change” is OFF, the
frequency is not automatically changed to distress
frequency.
In this case, after pressing the CANCEL key to stop
the alert, select the “Accept” on the popup screen
to set the distress frequency and skip to step 3.
Note
ID 431001234 : +
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
TEL Rx: 4357.00/Tx: 4065.00kHz
9
W
M
ENU
G
PS
[Close]
New BAM alert
DET:2021-01-22 23:59:00(UTC)
Warning DISTRESS: RX
DIST-ID:123456789
Man overboard
Alert state:
Active unacknowledged
V
V
TEL
ID 431001234 : +
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
S
IG
RX
2182.00
kHz
TX
2182.00
kHz
W
KR
2
4
6
8
12
16
A
DST ALT
G
PS
M
ENU
9
RxID:123456789|DISTRESS ALT
Waiting to send ACK(00.2min)
Single -FRQ: 2187.50kHz
TEL : Rx 2182.00/Tx 2182.00kHz
Press CANCEL to stop buzzer.
W V
RxID :123456789|
Press CANCEL to silence alarm.
TEL
S
IG
RX
2182.00
kHz
TX
2182.00
kHz
W
KR
2
4
6
8
12
16
A
DST ALT
DISTRESS ALT
Waiting to send ACK (00.2 min )
Single - FRQ : 2187 .50kHz
TE L : Rx 2182 .00 / Tx 2182 .00 KHz .
2182
.0
2182
.0
kHz
kHz
AR:AR:
RxFR
: 123456789 |
SAME DST ON ANOTHER FRQ
From :123456789
Work - F : 8291 .00 kHz
EQP will tune to the
above FRQ within
10 s .
Accept ] [ Ignore ]
[ Accept
]
G
PS
9
W
M
ENU
V
ID 431001234 : +
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
RxID :123456789|
TEL
S
IG
RX
8291.00
kHz
TX
8291.00
kHz
W
KR
2
4
6
8
12
16
A
DST ALT
DISTRESS ALT
Waiting to send ACK (00.6min )
TE L : Rx 8291 .00 / Tx 8291 .00 KHz .
Multi - FRQ :2 / / / 8 / /
[ ACK ][ RLY ][ INF ][ FRQ ][ HLD ][ END ]
G
PS
9
W M
ENU
V
ID 431001234 : +
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
RxID :123456789|
TEL
S
IG
RX
2182.00
kHz
TX
2182.00
kHz
W
KR
2
4
6
8
12
16
A
DST ALT
DISTRESS ALT
Waiting to send ACK (00.6min )
TE L :
Rx
2182 .00 / Tx 2182 .00 KHz .
Single - FRQ : 2187 .5KHz
[ ACK ][ RLY ][ INF ][ FRQ ][ HLD ][ END ]
G
PS
9
W M
ENU
V
ID 431001234 : +
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59
RxID 123456789 |
.
kHz
2182.00
kHz
: 123456789 |
.0
.0
kHz
kHz
: 123456789 |
- Received DSC msg -
DST call
From : 123456789
Work - F
:
2182 .00kHz
Change the FREQ
?
[ Ignore]
[
Accept
]
To Next Page
Loading...
