JRC JUE-95SA - Page 44

3-10
*When PSTN is selected to Network Type
9. Input Destination Code and Subscribers Number.
Input Destination Code to first box (from left) within the range of 0 to 999.
Input Subscribers Number to second box (from left) by 12-digit figure.
10. Select Modem Type from following 4 choices:
・ V22
・ V22bis
・ V32bis
・ Others
※Input character string, one alphabet and 3-digit figures when others are selected.
11. Select Character Code from following 2 choices:
・ IA5
・ DATA
12. Setup Security Alert ON/OFF.
13. Input SSAS Message by one-byte character, 512 character or less.
14. Repeat the procedure from No.5 to No.13 when you edit other SSAS Scheduled data.
15. Click [SET] button to write the data into INMARSAT terminal, when setup is completed.
*When Facsimile is selected to Network Type
9. Input Destination Code and Subscribers Number.
Input Destination Code to first box (from left) within the range of 0 to 999.
Input Subscribers Number to second box (from left) by 12-digit figure.
10. Select Character Code from following two choices:
・ IA5
・ DATA
11. Setup Security Alart ON/OFF.
12. Input SSAS Message by one-byte character, 512 character or less.
13. Repeat the procedure from No.5 to No.12 when you edit other SSAS Scheduled data.
14. Click [SET] button to write the data onto INMARSAT terminal, when setup is completed.
*When PSDN or Closed Net is selected to Network Type
9. Input Destination Code and Subscribers Number:
Input Destination Code to first box (from left) within the range of 0 to 9999.
Input Subscribers Number to second box (from left) by 10-digit figure.
10. Select Character Code from following two choices:
・ IA5
・ DATA
11. Setup SSAS Schedule ON/OFF.
12. Input SSAS Message by one-byte character, 512 character or less.
13. Repeat the procedure from No.5 to No.12 when you edit other SSAS Scheduled data.
14. Click [SET] button to write the data onto INMARSAT terminal, when setup is completed.