MC
3
TABLE OF CONTENTS
Operating manual ..........................................................................................................5
1. Intended use ..........................................................................................................5
1.1. Description .........................................................................................................5
2. Operator responsibility – Safety recommendations ...............................................6
2.1. Disposal..............................................................................................................8
2.2. EC Conformity ....................................................................................................9
2.3. Warranty conditions............................................................................................9
2.4. Technical specifications ...................................................................................10
2.5. Cooling water connection .................................................................................16
Operating instructions ..................................................................................................18
3. Operating controls and functional elements.........................................................18
4. Safety notes for the user ......................................................................................20
4.1. Explanation of safety notes ..............................................................................20
4.2. Explanation of other notes ...............................................................................20
4.3. Safety recommendations..................................................................................20
5. Preparations.........................................................................................................23
5.1. Installation ........................................................................................................23
5.2. Bath fluids.........................................................................................................24
5.3. Filling / draining ................................................................................................25
5.4. Temperature application to external systems ..................................................26
5.4.1. Tubing ......................................................................................................26
6. Operating procedures ..........................................................................................28
6.1. Power connection.............................................................................................28
6.2. Switching on / Start - Stop................................................................................28
6.3. Automatic / non-automatic start mode .............................................................30
7. Setting the temperatures .............................................................................31
7.1. 1-setpoint mode................................................................................................31
7.2. 3-setpoint mode................................................................................................31
8. Safety installations, warning functions.........................................................33
8.1. Excess temperature protection ........................................................................33
8.1.1. Early warning system, low level protection ..............................................34
8.2. High and low temperature warning functions ...................................................35
8.3. Limitation of the operating temperature range .................................................36
To Next Page
Loading...
